Process position before model
The same equipment family can serve pre-selection, concentration, cleaning, scavenging or tailings recovery depending on its location in the flow sheet.
Belt High-Gradient Magnetic Separator
The Belt High Gradient Magnetic Separator is a mineral-processing option for duties where the feed and target mineral response require a high-gradient separation stage. It should be placed in a defined process position, not selected as a stand-alone promise: the relevant questions are what enters the machine, which fraction is expected to respond magnetically and how the resulting streams continue through the plant.
- Process position before model
- Feed condition controls the design
- Target stream is defined
- Testing may be required
- Process role
- Pre-concentration, recovery or magnetic impurity removal
- Feed state
- Dry bulk or slurry, depending on the equipment
- Separation basis
- Magnetic response and process flow
- Selection starts with
- Mineral, particle size, feed condition and target
Product role
Overview and how it fits the process
The Belt High Gradient Magnetic Separator is a mineral-processing option for duties where the feed and target mineral response require a high-gradient separation stage. It should be placed in a defined process position, not selected as a stand-alone promise: the relevant questions are what enters the machine, which fraction is expected to respond magnetically and how the resulting streams continue through the plant.
Before configuration, the project team should provide mineral type, feed size, moisture or slurry condition, throughput, separation target and any available process or test information. These inputs help determine whether this equipment family fits the duty or whether a drum, wet, dry or other separation route should be reviewed instead.
Selection logic
Why this configuration needs site information
Feed condition controls the design
Particle size, liberation, moisture or slurry condition and feed consistency are reviewed before a configuration is proposed.
Target stream is defined
The selection discussion distinguishes the magnetic product, non-magnetic product and the downstream stage that receives each stream.
Testing may be required
Where mineral behavior is uncertain, representative material and process information should be reviewed before commitments are made.
Process position
Where it fits in a typical material flow
The diagram is a planning aid. Final positioning is confirmed from the line layout and the material duty.
- 01Prepared feed
- 02Magnetic separation stage
- 03Magnetic product stream
- 04Non-magnetic or tailings stream
- 05Downstream recovery or processing
Applications
Typical materials and industry contexts
Technical information
Technical specifications and confirmation basis
Published model references are shown where available. Final technical details are confirmed from current product records, material and site conditions.
ParameterPublished recordSelection confirmation
Model designationAvailable on requestTo be confirmed based on material and site conditions.
Process dutyAvailable on requestTo be confirmed based on material and site conditions.
Feed sizeAvailable on requestTo be confirmed based on material and site conditions.
Feed conditionAvailable on requestTo be confirmed based on material and site conditions.
ThroughputAvailable on requestTo be confirmed based on material and site conditions.
Magnetic product directionAvailable on requestTo be confirmed based on material and site conditions.
Non-magnetic product directionAvailable on requestTo be confirmed based on material and site conditions.
Water or slurry requirement where applicableAvailable on requestTo be confirmed based on material and site conditions.
Selection checklist
What to send for an initial configuration review
- State whether the objective is recovery, upgrading, cleaning or tramp iron removal.
- For wet circuits, describe the slurry condition and available water or process constraints.
- Share laboratory, plant or sample information when available.
Important boundary
- No recovery or grade claim is made without representative material and process evidence.
- Magnetic separation does not replace required crushing, screening, classification or other upstream preparation stages.
Send the process details with the product pre-selected in the inquiry form.
Start product inquiryProcess equipment
Related products for the same process line
Magnetic Separation EquipmentDisc Magnetic Separator for Tailing
View product
Magnetic Separation EquipmentDry Drum Magnetic Separator
View product
Magnetic Separation EquipmentWet Drum Magnetic Separator
View product
Magnetic Separation EquipmentCTN wet full countercurrent magnetic separator
View product
Magnetic Separation EquipmentCTS type wet co current magnetic separator
View productProduct FAQ
Questions to resolve before ordering
How is a mineral magnetic separator selected?
Selection begins with the mineral, particle size, feed condition, desired magnetic and non-magnetic product streams, throughput and the place of the machine in the process flow.
Can one separator solve every ore separation problem?
No. Magnetic response, liberation, feed preparation and separation target vary by material. A dry, wet, high-gradient or drum configuration is selected for the actual duty.
What should be sent for an initial technical review?
Provide mineral name, feed size, moisture or slurry condition, throughput, process sketch, desired product streams and any available test or plant data.
Are recovery results guaranteed from a catalog page?
No. Recovery depends on the material and process. Results should only be discussed after the feed and operating conditions are reviewed.
Request a quote
Share the operating conditions for Belt High-Gradient Magnetic Separator
Your inquiry is tagged with this product page, product family, language, referrer and campaign data for the COWIN MAGNET team.