RCDB Self-Cooling Electromagnetic Iron Remover

Name: RCDB Self-Cooling Electromagnetic Iron Remover
Brand: COWIN MAGNET

Product role

Overview and how it fits the process

The RCDB self-cooling plate electromagnetic iron remover is an overhead electromagnetic option for a defined conveyor duty. It is selected when the material burden, suspension position or expected ferromagnetic risk needs an electrically energized magnetic stage, with the equipment placed around a known material trajectory and maintenance access route.

This page does not assume a self-cleaning discharge belt or a special environmental rating. Power supply, working duty, cooling conditions, cleaning procedure, ambient environment and any control arrangement are confirmed against the final project requirements.

Selection logic

Why this configuration needs site information

01

Defined magnet position

The separator is selected around the actual conveyor path, discharge point and available suspension space.

02

Cleaning method matched to contamination

Manual cleaning suits lower contamination where a safe service stop is acceptable; self-cleaning is considered for continuous discharge requirements.

03

Conveyor data first

Belt width, speed, material layer depth and the largest expected tramp item are required before a model can be confirmed.

04

Site conditions matter

Dust, temperature, power availability and access for maintenance should be reviewed with the installation layout.

Process position

Where it fits in a typical material flow

The diagram is a planning aid. Final positioning is confirmed from the line layout and the material duty.

01Feed conveyor
02Tramp iron risk point
03Suspended magnet position
04Ferrous discharge or manual cleaning
05Protected downstream equipment

Engineering reference

Installation and dimensional reference

These diagrams support preliminary discussion. Final dimensions and installation details are confirmed for the selected configuration.

RCDB Self-Cooling Plate Electromagnetic Iron Remover technical reference drawing 1 — Technical reference drawing. Confirm final dimensions and installation details for the selected configuration.

RCDB Self-Cooling Plate Electromagnetic Iron Remover technical reference drawing 2 — Technical reference drawing. Confirm final dimensions and installation details for the selected configuration.

RCDB Self-Cooling Plate Electromagnetic Iron Remover technical reference drawing 3 — Technical reference drawing. Confirm final dimensions and installation details for the selected configuration.

Applications

Typical materials and industry contexts

Mining and mineral processing Recycling and metal recovery Cement and aggregate

Technical information

Technical specifications and confirmation basis

Published model references are shown where available. Final technical details are confirmed from current product records, material and site conditions.

Model reference. Final configuration must be confirmed against material and site conditions.
Reference field: 项目 / 参数	Suitable belt width (mm)	Reference field: 额定吊高h mm	Magnetic field reference	Material burden thickness (max. mm)	Excitation power	Belt speed (max. m/s)	Weight (kg)	Overall dimensions	Overall dimensions	Overall dimensions	Overall dimensions
型号	适应带宽 mm	额定吊高h mm	磁场强度 ≥mT	物料厚度 ≤mm	励磁功率 ≤kw	适应带速 ≤m/s	重量 kg	外型尺寸mm	外型尺寸mm	外型尺寸mm	外型尺寸mm
RCDB-3	适应带宽 mm	额定吊高h mm	磁场强度 ≥mT	物料厚度 ≤mm	励磁功率 ≤kw	适应带速 ≤m/s	重量 kg	300	75	50	50
RCDB-4	400	100	50	70	0.6	300	240	280	500	400
RCDB-5	500	150	60	90	1	430	280	325	610	450
RCDB-6	600	175	60	120	1.6	580	280	325	710	500
RCDB-6.5	650	200	70	150	2	680	280	325	816	640
RCDB-8	800	250	70	200	3.6	950	310	355	960	780
RCDB-10	1000	300	70	250	5	1520	310	360	1200	920
RCDB-12	1200	350	70	300	6.8	2250	310	365	1400	1000
RCDB-14	1400	400	70	350	9	2950	405	485	1650	1400
RCDB-16	1600	450	70	400	13	4800	460	540	1900	1650
RCDB-18	1800	500	70	450	18	6900	530	610	2150	1800

Configuration

Configuration points to review

Permanent or electromagnetic magnet system where applicable

Manual-clean or self-cleaning discharge arrangement

Cross-belt or inline mounting review

Suspension frame and guarding coordinated to site layout

Selection checklist

What to send for an initial configuration review

Confirm the installation direction: inline, cross-belt or at the discharge end.
Provide a conveyor drawing or site photo where available.
Allow a safe area for captured-metal discharge or manual cleaning.

Important boundary

Not a substitute for an eddy current separator where non-ferrous recovery is required.
Final selection cannot be confirmed from product name alone; conveyor and material conditions must be reviewed.

Send the process details with the product pre-selected in the inquiry form.

Start product inquiry

Process equipment

Related products for the same process line

Product FAQ

Questions to resolve before ordering

When is self-cleaning preferred over manual cleaning?

Self-cleaning is normally considered where ferrous contamination must be discharged continuously. Manual cleaning may be appropriate when contamination is low and the line can be isolated safely for service.

Should the magnet be installed inline or cross-belt?

The installation direction depends on belt speed, burden depth, the discharge side, available headroom and the required exposure to the magnetic field. The conveyor arrangement should be reviewed before selection.

What information is needed for a suspended magnet quote?

Please provide belt width, speed, material layer depth, suspension height, material description, the largest expected tramp item, desired cleaning method and a layout drawing or photos when available.

Can this separator remove all metals?

No. A magnetic separator is used for ferromagnetic contaminants. Non-ferrous metals and non-magnetic stainless steel require a different separation or detection stage.