Browse magnetic separator options by category, then send your material, conveyor width, installation height, contamination level, and target application for selection support.
product overview： 1、 Explanation The RCYD permanent magnet self dumping iron remover is equivalent to the RCYC series model and is suitable for removing iron from conveyor belts in various industries. It can achieve continuous suction and disposal of iron.
View product
product overview： 1、 Explanation The RCDD self cooling self dumping electromagnetic iron remover is a device used for automatically removing impurities of iron from powdered or block shaped non-magnetic materials. It is internally cast with electrical
View product
product overview： 1、 Explanation The RCYB type permanent magnet manual iron remover adopts a composite magnetic system composed of special permanent magnets such as neodymium iron boron with high coercivity and high remanence inside. Suitable for removing
View product
product overview： 1、 Explanation The RCDB type self cooling disc electromagnetic iron remover is equivalent to the PDC series disc electromagnetic iron remover and the RCDY series electromagnetic iron remover. It is an iron removal device used to remove
View product
Belt High Gradient Magnetic Separator is a high performance magnetic separation equipment designed for small size ore(size less than 2mm) processing and magnetic material separating from mineral.
View product
Iron ore tailing recovery machine is used in iron mine to recover magnetic minerals from the tailing and reduce ore wastage. In this way, the resource can be fully used.
View product
Dry Drum Magnetic Separator is a high-efficiency ore concentration machine used to remove, purify, or separate magnetic materials in dry processing lines.
View product
Wet permanent Drum Magnetic Separator are used in Dense Media Separation (DMS) plants for the recovery of magnetic particles from the dilute medium. They must recover the maximum amount of magnetic particles at the highest possible density.
View product
product overview： 1、 Characteristics The CBZ rotary automatic magnetic separator can be installed in assembly lines to remove fine and very fine iron metal impurities from bulk materials. The automatic timing controller can set the cleaning time interval
View product
product overview： 1、 Explanation The CGB rotary semi-automatic magnetic separator is mainly used to separate ferromagnetic impurities in materials that are prone to clumping or adhesion. The rotating magnetic rod driven by the motor can prevent material
View product
product overview： 1、 Explanation The CQZ type fully automatic online magnetic separator is installed in the assembly line to achieve real-time automatic removal of iron from materials online. The automatic timing controller can be set for continuous automatic
View product
product overview： 1、 Explanation The core technology of CTN wet full countercurrent magnetic separator adopts computer simulation design of magnetic circuit, which makes the magnetic field distribution in the magnetic separation zone more uniform, without
View product
product overview： 1、 Explanation The CTS wet co current magnetic separator is used in chemical and other industries to separate fine-grained ferromagnetic substances mixed in the solution. As required by the process, magnetic powder added as a coagulation
View product
product overview： 1、 Characteristics The CXJ drum type automatic magnetic separator (from single drum to triple drum) is a magnetic separation equipment that continuously and automatically removes iron from dry powder. It adopts a unique magnetic circuit
View product
product overview： 1、 Explanation The DCZ dry fully automatic magnetic separator is suitable for removing various powdered materials that have passed 10-1500 mesh, such as lithium battery positive electrode ternary materials, lithium manganese oxide, lithium
View product
product overview： 1、 Explanation ◇ Dual frequency or multi frequency technology can be selected. Shell material: stainless steel (standard type), PP, PS and other materials can also be selected.
View product
product overview： 1、 Explanation CGT type super strong full magnetic drum is mainly used to remove ferromagnetic impurities in powder, sheet and granular raw materials, and is widely used in industries such as ceramics, power, mining, plastics, chemicals,
View product
product overview： 1、 Explanation The CTZ type mid field strong semi magnetic drum (with CTZ type mid field strong full magnetic drum structure and RCT type parameters equivalent) is commonly used for purifying powdered, granular, and small block materials, or
View product
product overview： 1、 Explanation The RCDA air-cooled electromagnetic iron remover is suitable for use in outdoor or various light dust environments. The coil has undergone special treatment, is resistant to oxidation, corrosion, and has good insulation
View product
product overview： 1、 Explanation The RCDC air-cooled self dumping electromagnetic iron remover is an iron unloading mechanism composed of a drive motor, a drum, and an iron unloading tape with a scraper added to the RCDA series iron remover. During the
View product
product overview： 1、 Explanation The RCDE oil cooled electromagnetic iron remover adopts advanced internal and external oil circulation heat dissipation pipe design and unique winding technology of internal excitation coil. It has a fully sealed structure and
View product
product overview： 1、 Explanation The RCDF oil cooled self dumping electromagnetic iron remover is an iron unloading mechanism composed of a drive motor, a drum, and an iron unloading tape with a scraper added to the RCDE series iron remover. It has the
View product
product overview： 1、 Explanation The RCDFJ type forced oil circulation self dumping electromagnetic iron remover is suitable for places with particularly high requirements for iron removal, such as coal transportation ports, large thermal power plants, and
View product
product overview： 1、 Explanation The RCPS self dumping disc type permanent magnet iron remover is an efficient iron remover developed by our company. The internal magnetic materials of this device are all made of high-strength rare earth "neodymium iron boron
View product
product overview： 1、 Explanation RCT type fully magnetic drum is equivalent to RCTG series, also known as magnetic pulley or dry bulk magnetic separator. It uses high-performance strong magnetic materials internally to form a strong magnetic system, which has
View product
product overview： 1、 Explanation The RCYA inclined pipeline permanent magnet iron remover is divided into two types: RCYAl and RCYA2, which include non-magnetic pipelines and permanent magnets. It is specially designed for removing non-magnetic materials in
View product
product overview： 1、 Explanation Compared with the RCYD type permanent magnet self dumping iron remover, the RCYDII type permanent magnet self dumping iron remover has a shorter frame and is suitable for situations where installation space is limited. It is
View product
product overview： 1、 Explanation This machine uses high-strength rare earth neodymium iron boron to form a strong magnetic core, which has a strong magnetic field and high magnetic field gradient. Suitable for installation in narrow spaces with limited space,
View product
product overview： 1、 Explanation The RCYF vertical pipeline permanent magnet iron remover is suitable for removing iron from powdered, granular, and block materials in industries such as cement, building materials, chemical, grain, plastics, coal, refractory
View product
product overview： 1、 Explanation The RCYG pipeline self dumping permanent magnet iron remover is a high-performance automated iron removal equipment independently developed by our company. This equipment is mainly used for iron removal of cement, water slag,
View product
product overview： 1、 Explanation The RCYP type permanent magnet manual self dumping iron remover is suitable for situations where the conveyor belt is narrow, the material is thin, and there is less impurity iron. This machine has a simple structure, reliable
View product
product overview： 1、 Explanation The RCYZ vertical pipeline permanent magnet iron remover is an energy-saving device that uses permanent magnet materials to generate a strong magnetic field attraction. The interior is composed of a ring-shaped magnetic system
View product
product overview： 1、 Explanation The CQZ type fully automatic online magnetic separator is installed in the assembly line to achieve real-time automatic removal of iron from materials online. The automatic timing controller can be set for continuous automatic
View product
product overview： 1、 Explanation The CTB wet semi countercurrent magnetic separator is suitable for the scanning and selection of strong magnetic materials with a particle size of 0.5mm or less in wet separation, especially for the selection of minerals with
View product
product overview： 1、 Explanation The DCX wet fully automatic magnetic separator is widely used to remove iron powder, micro iron powder, magnetic substances, etc. from slurries and glazes in industries such as ceramics, mining, chemical, electronics, and food.
View product
product overview： 1、 Explanation The DCZ dry fully automatic magnetic separator is suitable for removing various powdered materials that have passed 10-1500 mesh, such as lithium battery positive electrode ternary materials, lithium manganese oxide, lithium
View product
product overview： 1、 Explanation The GTC wet plate magnetic separator is mainly suitable for magnetic separation of weak magnetic minerals with particle size below 5mm and iron removal of non-metallic minerals, such as mica powder, quartz sand, potassium
View product
product overview： 1、 Explanation Our company's HJLH wet vertical ring high gradient magnetic separator belongs to independent innovation and research and development, and has obtained a national utility model patent. Its technological innovation adopts simple
View product
product overview： 1、 Explanation The HJPC wet disc magnetic separator is a new type of high gradient magnetic separation equipment independently developed by our company, with a high magnetic field strength of 16000 GS. It is a device specifically designed
View product
product overview： 1、 Explanation The CLT type magnetic desliming tank is a separation equipment that combines magnetic and gravity forces, which can effectively separate the gangue and poor connected bodies contained in the concentrate. Its effective sorting
View product
product overview： 1、 Explanation The CTB wet semi countercurrent magnetic separator is suitable for the scanning and selection of strong magnetic materials with a particle size of 0.5mm or less in wet separation, especially for the selection of minerals with
View product
product overview： 1、 Explanation The CTDG type permanent magnet bulk dry magnetic separator is a new type of high-efficiency energy-saving mineral processing equipment. In addition to existing standardized products, magnetic separators (magnetic pulleys) with
View product
product overview： 1、 Explanation The core technology of CTN wet full countercurrent magnetic separator adopts computer simulation design of magnetic circuit, which makes the magnetic field distribution in the magnetic separation zone more uniform, without
View product
product overview： 1、 Explanation The CTS type downstream wet pre selection machine is suitable for pre selection and selection of coarse-grained strong magnetic materials with a particle size of 6-0mm, or for removing mixed strong magnetic minerals in
View product
product overview： 1、 Explanation The CTZS type upward suction magnetic separator is a specialized equipment developed by our company for typical industries such as household waste classification, industrial waste classification, and scrap steel crushing
View product
product overview： 1、 Explanation The HCG type dry pre selection machine is mainly designed for pre selection of 5% -20% ultra-low grade, low-grade magnetite and dry powder ores, effectively improving the grinding grade, reducing the beneficiation cost, and
View product
product overview： 1、 Explanation Our company's HJLH wet vertical ring high gradient magnetic separator belongs to independent innovation and research and development, and has obtained a national utility model patent. Its technological innovation adopts simple
View product
product overview： 1、 Explanation The LJK iron removal system is mainly suitable for removing iron from magnetic ore conveyor belts such as raw ore, sintered ore, pellet ore, and block ore. The LJK iron removal system relies on its unique magnetic circuit
View product
product overview： 1、 Explanation The NCT type concentrated magnetic separator is specifically designed for the concentration of low concentration slurry in the magnetic separation process, increasing the concentration of the slurry. Mainly used in the
View product
product overview： 1、 Explanation The WBC type semi magnetic tailings recovery machine is suitable for selecting magnetic minerals. It can enrich and recover magnetic minerals in tailings slurry or remove magnetic impurities from other suspensions.
View product
product overview： 1、 Explanation The CTN type coal washing specialized magnetic separator is a fully countercurrent wet magnetic separation equipment designed specifically for the recovery of magnetic media in heavy medium coal preparation plants. Its core
View product
product overview： 1、 Explanation: The HMDN coal washing special magnetic separator is a fully countercurrent wet magnetic separation equipment designed specifically for the recovery of magnetic media in heavy medium coal preparation plants. Drawing on
View product
A suspended permanent magnet for reliable tramp iron capture where manual or periodic cleaning is acceptable.
View product
An electromagnetic conveyor belt separator for working conditions that require adjustable and powerful magnetic force.
View product
product overview： 1、 Explanation Adopting a split structure, easy to install. Product tracking function: It can automatically adjust and compensate internally based on changes in product effects.
View product
product overview： 1、 Explanation The GJT window type metal detector is currently an excellent product in the field of metal detection in China. In the circuit design, a new metal detection technology - digital phase shifting and related detection technology -
View product
product overview： 1、 Explanation The HECP eddy current metal sorting machine can be widely used in various environmental protection fields and material processing in the non-ferrous metal processing industry. Its typical application is significant in the
View product
product overview： 1、 Explanation The physical basis of the HECS eddy current metal sorting machine is based on two important physical phenomena: a time-varying alternating magnetic field always accompanies an alternating electric field; A current carrying
View product
CHNMAG Drum Magnet is a separation machine designed for the continuous extraction of ferrous metal contamination from dry bulk material. Material is fed uniformly to the drum magnet from a conveyor, vibration feeder or chute, ensuring continuous metal
View product
CHNMAG Eccentric Eddy Current Separator designed to separate valuable non-ferrous metals wherever non-ferrous metals have to be recovered or separated, e.g. where shredder material, municipal waste, WTE bottom ash, electronic scrap, wood chips, glass,
View product
CHNMAG Suspended Electromagnet Separator engineered to provide ferrous metal separation performance. If your application requires increased suspension heights for the magnet or have a deep product burden, the suspended electromagnet separator is an ideal
View product
Magnetic Head Pulley also know as magnetic roller is a reliable solution for the continuous extraction of ferrous metals from a product stream. Magnetic pulley or magnetic roller are installed as a replacement head pulley at the discharge end of a conveyor to
View product
QJRCY-L Permanent Overband Magnetic Separator also known as Cross Belt Magnetic Separator or Cross Belt Magnet designed with strong and stable magnetic strength equipped with a continuously discharge running belt, is used for pulling out tramp iron from belt
View product
CHNMAG QJSS Stainless steel separation conveyor is used for sorting out stainless steel or other weak magnetic materials after the separation process of primary magnetic separation and eddy current separation.
View product
product overview： 1、 Explanation CBS drawer type magnetic filters are mainly used in highly sensitive applications such as food, pharmaceuticals, chemistry, quartz sand, ceramics, etc. Its strong and wear-resistant casing is made of rust proof stainless steel.
View product
product overview： 1、 Explanation CLC slot type magnetic filter is suitable for removing iron from slotted liquids and slurries, and is used to remove ferromagnetic impurities in liquids and slurries. It is widely used in industries such as ceramics, power,
View product
product overview： 1、 Explanation Adopting a new type of special rare earth permanent magnet material, it has ultra-high magnetic field strength and high magnetic field gradient. The number of magnetic rollers can be customized to 1-10 according to customer
View product
product overview： 1、 Explanation The CYG wet pipeline magnetic filter is suitable for removing small ferromagnetic metal particles from various liquid and paste products. The powerful magnetism can even remove low magnetic iron impurities from the product
View product
product overview： 1、 Explanation The RCYZ vertical pipeline permanent magnet iron remover is an energy-saving device that uses permanent magnet materials to generate a strong magnetic field attraction. The interior is composed of a ring-shaped magnetic system
View product
product overview： 1、 Explanation CLC slot type magnetic filter is suitable for removing iron from slotted liquids and slurries, and is used to remove ferromagnetic impurities in liquids and slurries. It is widely used in industries such as ceramics, power,
View product
product overview： 1、 Explanation The magnetic system of the DHD type roller type automatic magnetic separator has been specially designed and belongs to the permanent magnet local semi closed magnetic system structure; The magnetic induction intensity is high
View product
product overview： 1、 Explanation The DHJ type strong roller automatic magnetic separator is a new type of dry sorting equipment independently developed by our company based on years of market experience. 1-10 layer structures can be produced according to
View product
product overview： 1、 Explanation The QCG wet roller magnetic separator is a combination model developed by our company based on years of experience and customer on-site requirements. It can achieve multiple structures or combinations of different magnetic
View product
Drawer magnets are designed for efficient fine iron and ferromagnetic contamination removing from a range of dry free flowing powder,scrap.granule product such as sugar, grain, tea, etc. They are widely used in field of ceramics, chemicals,
View product
Hump Magnets are used to remove large pieces of tramp iron as well as ferrous fragments from gravity-flow materials or material flow activated by wind in enclosed flow lines before they reach storage bins or processing equipment. They can be mounted in
View product
Magnetic Grate is installed or simply laid-inside of hoppers, housings, and bins to trap and hold ferrous fines, fragments,and small metal objects. Please be aware these grates are built for low-abrasion materials.
View product
Magnetic bars are the main part of different magnetic grate separators. They can effectively remove ferrous chips and metal particles from loosely packed, free flowing materials.
View product
Magnetic Liquid Traps or Magnetic Liquid Filters are designed for liquid or semi-liquid flow systems to remove ferrous contamination from liquid with different viscosity level. They preserve product purity by removing small contaminants , provide magnetic
View product
Suitable for removing iron scrap or micro ferromagnetic contamination from powder or granule materials, especially from high viscosity or poor fluidity materials that is prone to caking or bridging. Rotary grate magnetic separators are widely used in building
View product
High-gauss magnetic rods used to capture fine ferrous contamination in material flow and filtration systems.
View product
High frequency screen consists of a vibrator, pulp distributor, screen frame,rack,suspension spring, mesh and other components. It has the advantages of high efficiency, small amplitude and high screening frequency, and is an effective equipment for screening
View product
product overview： 1、 Explanation The KGLA series rectifier control equipment is a small and medium-sized rectifier control cabinet designed by our company for electromagnetic, permanent magnet self dumping and other magneto electric equipment. It is divided
View product
product overview： 1、Explanation: 2、 Schematic diagram 3、 Purpose: Suitable for rectification and control of mining explosion-proof electromagnetic iron remover. 4、 Scope Suitable for explosive gas environments with methane and coal dust in underground coal
View product
product overview： 1、 Explanation 2、 Schematic diagram 3、 Purpose: Suitable for motor control of mining explosion-proof permanent magnet iron remover. 4、 Scope Suitable for remote and nearby control of the starting and stopping of three induction motors of
View product
product overview： 1、 Explanation RBCDB explosion-proof disc type electromagnetic iron remover is suitable for explosive gas environments with methane components and mines with coal dust. The body adopts a natural cooling design, with small size, fast heat
View product
product overview： 1、 Explanation RBCDD explosion-proof self dumping electromagnetic iron remover is suitable for explosive gas environments with methane components and mines with coal dust. The body adopts a natural cooling design, with small size, fast heat
View product
product overview： 1、 Explanation RBCYD explosion-proof permanent magnet self dumping iron remover is suitable for places with explosive gases. It is used in conjunction with conveyor belts to remove magnetic iron mixed in non-magnetic materials.
View product
A round lifting electromagnet for handling ferrous metal materials in industrial loading and unloading scenarios.
View product